$Id: mod.transfer,v 1.1.1.1 2010/07/26 21:11:06 simple Exp $

Transfer Module
Last revised: January 1, 2002
    _____________________________________________________________________

                              Transfer Module


  The transfer module provides DCC SEND/GET support and userfile transfer
  support for userfile sharing.

  This module requires: none

  Put this line into your Eggdrop configuration file to load the transfer
  module:

    loadmodule transfer

  There are also some variables you can set in your config file:

    set max-dloads 3
      Set here the maximum number of simultaneous downloads to allow for
      each user.


    set dcc-block 0
      Set here the block size for dcc transfers. ircII uses 512 bytes,
      but admits that may be too small. 1024 is standard these days.
      Set this to 0 to use turbo-dcc (recommended).


    set copy-to-tmp 1
      Enable this setting if you want to copy files into the /tmp directory
      before sending them. This is useful on most systems for file stability,
      but if your directories are NFS mounted, it's a pain, and you'll want
      to set this to 0. If you are low on disk space, you may also want to
      set this to 0.


    set xfer-timeout 30
      Set here the time (in seconds) to wait before an inactive transfer
      times out.

    _____________________________________________________________________

  Copyright (C) 2000 - 2010 Eggheads Development Team